SMT Splice Solutions Splice Tapes guarantee precise and secure connections of SMT component reels used in pick and place machines. To avoid unnecessary stoppages of pick and place machines SMT Splice Solutions Splice Tapes provide precise attachment of new and depleted component reels. The component reels become securely joined, and the cover tape can be peeled off continuously across the joint thus avoiding wastage of valuable components.

Product groups >>

Splice Station is an all-in-one original solution to all your splicing needs. The  Splice Station includes all the necessities to attach a new and old reel in the electronic manufacturing industry, in a solid portable trolley. The Splice Station, is easily assembled, its unique features include a Splice Tool with placement pins for increased accuracy, a handheld Splice Scissors, and an axle to hold the new reel, all encompassed in a compact, mobile design, which is entirely ESD safe.

The Tape Splicing Tool is used for attaching the end of a depleted reel of components to the beginning of a new reel without stopping the pick and place machine...... Splice Tool Kit includes: slicing tool, cutting tool, 100pcs Slicing Tape, Cutting tool, and 100pcs of extra long splice for wider carrier tapes (optional use).

Cutting Tool is specially designed for precise cutting of SMD Carrier Tapes prior to splicing. The Tape Splice has alignment pegs for cutting through the center of the sprocket hole on the carrier. The cutting tool cuts the carrier between the holes. Both tools are designed to cut all sizes of carrier from 8mm to 56mm wide. the Splice Tool is included with the kit.

Slicing Tape. To begin the splicing procedure, first remove protective liners from both ends of the Slicing Tape.

Place Splicing Tape in Tool with closed circles over the pins.

It is recommended to loosen the cover tape by lifting it with a knife about 1/8-inch (3mm) from beginning of the NEW reel. Place the carrier tape over the pins on the Tool.

Place end of OLD reel over the pins to make a near seamless joint.

Close the jaws of the Tool. Using a sharp knife, cut off excess Splicing Tape. Use the alignment notch on the Tool to steady the knife blade as you cut off the excess Splicing Tape.

Place narrow strip of spicing tape over the covers of the joined tape. The narrow splicing tape is for 8mm carrier tape. Use the wider strip of splicing tape for >12mm carriers tape. Extra long splicing strips are included and are only necessary to use on very wide carrier tape.

The Splicing procedure is now completed. Remove the joined carrier tape from the Splicing Tool and feed into pick and place machine without line shut-down.

This photo shows an example of the pull back of the joined cover tape as it travels over the spliced joint in the carrier tape.

Product Catalogue
SMT SPLICING

SMT SPLICING

Splice tapes on roll

Splice Cart Tapes

Single Splice Tapes

Double Splice Tapes

Splice and Clip

Splice tape with Holes

Tape Extenders

Splice Hand Tools

Thru-hole Splice Tapes

 

Stencil rolls

Tools

Kapton Tape

ESD Lab Coats